咸宁摩托车英文科目一

1. How should lamps be used by the motor vehicle driver who follows a vehicle on a road section at night where he street light condition is good?

A. Turn off the headlamp

B. Use high-beam

C. Turn off all lamps

D. Use low-beam

Answer: D

2. When a motor vehicle temporarily stops in fog, which lamp should be turned on?

A. Hazard lamp, clearance lamp and rear position lamp

B. Left-turn indicator, clearance lamp and rear position amp

C. Headlamp, clearance lamp and rear position lamp

D. Reverse lamp, clearance lamp and rear position lamp

Answer: A

3. When passing an intersection, vehicle motor drivers are not allowed to overtake.

A. Right

B. Wrong

Answer: A

4. What should motor vehicle drivers do when parking temporarily on a rainy day?

A. Turn on hazard lamp

B. Turn on front and back fog lamp

C. Turn on low-beam

D. Set up warning sign at the back of the vehicle

Answer: A

5. What is the meaning of this sign?

A. Slippery section

B. Sharp curve

C. Inverse curve

D. Continuous curves

Answer: C

6. What is the meaning of this sign?

A. School area

B. Watch for children

C. Crosswalk

D. Watch for pedestrians

Answer: B

7. How to ensure motor vehicles have sufficient power when driving uphill?

A. Downshift before reducing speed

B. Downshift after reducing speed

C. Downshift when the speed is excessively low

D. Downshift to the fullest extent

Answer: A

8. When two vehicles approach each other on a foggy day, what is the best method of safe driving?

A. Turn on the high-beam

B. Slowdown and maintain a large safety distance

C. Turn on the low-beam

D. Turn on the fog lamp

Answer: B

9. The wrong measure to use the brake of a motorcycle is to __________.

A. Simultaneously use the front and back brakes

B. Use the front brake first

C. Use the back brake first

D. Avoid using the front brake too early

Answer: B

10. How should lamps be used when a motor vehicle meets an oncoming bicycle on a narrow road or a narrow bridge at night?

A. Continuously change between low-beam and high-beam

B. Use clearance lamp

C. Use high-beam

D. Use low-beam

Answer: D